Reflow Soldering Machine T962A
|FOB Price:||US $550-580 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $550-580/ Piece|
|Transport Package:||Standard Export Box|
|Payment Terms:||T/T, Paypal|
- Model NO.: T962A
- Model: T-962A
- Type: Infrared and Hot Air
- PCB Max Width: 300mm
- Heating up Time: About 8 Mins
- Temperature Control Accuracy: +/-3oc
- Origin: Zhejinag
- Name: Reflow Soldering
- Heating Length: 960mm
- Power Supply: 380/220V
- Speed of Conveyer Belt: 0-1600mm/Min
- Packing Size: 51X45X33cm
- Specification: CE
- HS Code: 8515809090
After finishing mounting on PCB, use reflow oven to reflow solder.
|supply voltage||AC110V/50HZ AC220V/60HZ|
|Max soldering area||300x320mm|
|Cycle time||1-8 min|
1. A large infrared soldering area
Drawer panel area :300*320mm, this increases the usage range of this machine drastically and makes it an economical investment.
2.Choice of different soldering cycles
Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from preheat, soak and reflow through to cool down.
3.Special heat up and temperature equalization with all designs
Uses up to 1500W of energy efficient infrared heating and air circulation to re-flow solder.
4.Ergonomic design, practical and easily operated
Good quality and light weight, a small footprint allows the T962A to be easily bench positioned transported or stored.
5.Large number of available functions
It can solder most boss-eyed or double-face PCB boards small parts, ex: CHIP, SOP,PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production.
Enter into the setting interface when starts the machine. Press F2 button to select the wave, press F1 to select the point, press F3/F4 to set the corresponding temperature zone up and down, press F5 goes to the heating interface.
Five red switches separately control the upper 1/down 1/upper 2/upper 3/down 2 temperature zones.
When the temperature gets to balance, open the Motor switch and adjust the conveyor belt speed.
Press F2 stop heating, and enter into the setting interface.
stencil printer →pick and place machine→reflow soldering machine
And customer could choose the model of PNP machine against their need:
|Series||Max mounting size||Max mounting speed||Max avilable height||Tape width||Feeder of tape qty||Feeders of IC support|
Welcome to contact us freely if any interest ~~